当前位置: 主页 > PC3000 > SSD repair >

PC-3000 SSD

The PC-3000 SSD Software System operates in tandem with one of the three up-to-date hardware platforms – PC-3000 Express, PC-3000 UDMA, or PC-3000 Portable – and it is intended for SSD repair and diagnosis and for data recovery from SSDs with SATA, PATA, mSATA, and M.2 (NGFF) interfaces and the capacity from 64 GB to 1 Tb produced by different manufacturers, such as OCZ, Corsair, Crucial, RunCore, A-DATA, G.Skill, Micron, Plextor, Intel, Samsung, Seagate, Kingston and others.

The PC-3000 SSD contains a set of specialized utilities for working with solid-state drives. This set includes the Universal Utility for diagnosing any SSD based on the ATA-8 specification (both currently existing models and those that will be manufactured in future) and the Active Utilities (Special Utilities) intended for working with a particular drive model in factory mode. It enables to deeply diagnose SSDs, to perform service operations, to re-write the drive's microcode, to get direct access to memory chips, to carry out low-level formatting blocking the damaged cells and placing their addresses into the defect table, and to perform many other useful operations.

The PC-3000 SSD is started from the main window of the PC-3000 Express, UDMA, or Portable System by means of clicking a button on the desktop panel.

 

 

PC-3000 SSD has the following functions for data recovery:

  • verify and restore the SSD's service information
  • read and write the content of the SSD's ROM
  • load the microcode into the drives's RAM
  • emulate the translator operation in order to get access to user data
  • view the password and reset the password that was earlier set on an SSD
  • turn off background processes in an SSD to prevent data damage
  • provide direct access to the content of memory chips (it makes unsoldering unnecessary)
  • work with the Data Extractor

PC-3000 SSD has the following functions for SSD repair (to recover normal operation):

  • diagnose an SSD in factory mode
  • verify and restore the SSD's service information
  • read and write the content of the SSD's ROM
  • load the microcode into the drives's RAM
  • view the logs of hidden defects (P-page, G-page)
  • perform low-level formatting to hide the discovered defects
  • change the configuration and identification parameters
  • reset the logs and S.M.A.R.T. parameters
  • search for the damaged memory chips

The list of Active Utilities of the PC-3000 SSD System is expanded as soon as new SSD models are studied, and it is a continuous process. Those utilities that are currently available allow you to successfully recover data from all contemporary solid-state drives and to resolve the majority of wide-spread SSD problems. It is planned to add special adapters and connectors that will allow to use technological interfaces to diagnose and repair drives.

The PC-3000 SSD delivery package

  • the System's software, the resource database – 1 DVD
  • User manual – 1 book

Delivery package options for the System:

The PC-3000 SSD System can be operated via the PC-3000 Express, PC-3000 UDMA, or PC-3000 Portable controllers,so there are several delivery options: 
In a package with PC-3000 Express 
In a package with the PC-3000 Express 
 
In a package with PC-3000 UDMA-E
In a package with the PC-3000 UDMA
 
In a package with PC-3000 Portable
In a package with the PC-3000 Portable

 

Quick Online Access to the PC-3000 SSD

There is no need when the PC-3000 SSD will be shipped when you have an urgent SSD recovery case from your important customer.

The PC-3000 SSD software can be available immediately at the day of the payment.

Since the payment is done you will find the following in the Customer Update Box:

  • the System's software
  • the resource database
  • User manual
 
System's functionality: 
  • repair functions
  • data recovery functions
  • service and diagnostic functions

Compatibility with hardware: 
  • PC-3000 Express
  • PC-3000 UDMA-E - PC-3000 Portable

Compatibility with software: 
  • compatible with Data Extractor Express (RAID Edition)
  • compatible with Data Extractor UDMA (RAID Edition)
  • compatible with Data Extractor Portable

SSD operation modes: 
  • UDMA, PIO, Terminal

Supported interfaces: 
  • PATA,
  • SATA,
  • mSATA (if there is an adapter),
  • M.2 (NGFF) (if there is an adapter).

Working techniques: 
  • standard technological modes for SSD
  • the System's proprietary advanced technological modes
  • the possibility of working with dumps in the manual mode

Supported SSDs:

Utility Manufacturer Model Data recovery Repair
Indilinx Barefoot OCZ Vertex + -
  OCZ Vertex Turbo + -
  OCZ Vertex Plus + -
  OCZ Vertex Ex + -
  OCZ Solid 2 + -
  OCZ Agility + -
  OCZ Agility Ex + -
  Corsair Extreme + -
  Corsair Nova + -
  Crucial M225 + -
  RunCore Pro IV + -
  A-DATA Nobility + -
  A-DATA 500 series + -
  G.Skill Falcon + -
[all SSDs based on IDX110M0x controller]
         
Marvell VanGogh Crucial M4 + +
  Crucial C300 + +
  Crucial C400 + +
  Crucial M500 + +
  Micron C300 + +
  Micron C400 + +
         
Marvell VanGogh 2 Intel 510 Series + -
  Plextor M3 + -
  Plextor M5 + -
  Plextor M5 Pro + -
         
Intel Postville Intel X25-M (Gen.2) + +
  Intel X25-V (Gen.2) + +
  Intel 320 series + +
  Intel 710 Series + +
         
Samsung SSD Samsung PM 410 + -
  Samsung PM 800 + -
  Samsung 470 series + +
  Samsung 830 series + -
  Samsung P830 series mini + -
  Samsung 840 series + -
  Samsung 840 Pro Series + -
         
Seagate SSD Seagate Series 600 - +
  Seagate Series 600 Pro - +
  Seagate Series 600 Enterprise - +
         
JMicron Kingston V100 + -
[all SSD based on JMF61x controller]
 
Corsair SSD Neutron Series Corsair Corsair Neutron - +
         
 OCZ Barefoot 3 OCZ Vertex 450  +  -
  OCZ Vector  +  -
  OCZ Vector 150  +  -
  OCZ Vertex 460  +  -
  OCZ ARC 100  +  -
  AMD (OCZ) Radeon R7 + -
November 24, 2015 New software version PC-3000 SSD Ver. 2.0.2 is available now
Samsung SSD
  • The 840 EVO family is now supported
  • The following enhancements have been made for the 470 and 830 families:
    - Improved translator building algorithms;
    - New loaders added;
    - Apple SSD of the the 470 and 830 families are now supported.
  • The following enhancements have been made for the 840/840 PRO/840 EVO families:
    - Improved loader algorithms;
    - Improved algorithm of checking and reading memory chips in the loader;
    - Improved algorithm of memory chips reading in the utility;
    - Support of the 512 Gb drives (840/840 PRO);
    - Capability of hardware decryption for reading by logical sequence;
    - Improved algorithm of translator building for the 840/840 PRO family drives.
  • General changes of the utility:
    - Loader type can now be selected manually;
    - Memory chip information has been added into the "Utility Status" menu;
    - The window of family selection has been changed. Now the family can be selected by microprogram version and controller type.

OCZ Barefoot 3
  • New families are now supported:
    - OCZ Vector 150;
    - OCZ Vector 180;
    - OCZ Vertex 460;
    - OCZ Vertex 460A;
    - OCZ Arc 100;
    - AMD Radeon R7.
  • New tests have been added:
    - Low-level formatting;
    - "Clear S.M.A.R.T.";
    - Defect table report;
    - Trasfer of G-List into P-List.
  • New functionality:
    - Autodetect procedure for the drives in the “Safe" mode;
    - Clear password option for the drives in the "Safe" mode;
    - SMART attributes decoding;
    - Improved Defect Tables search algorithm.


March 31, 2015 New PC-3000 software updates are available now
PC-3000 SSD
Main changes and new functionality in PC-3000 SSD version 2.0.1:
  • Corsair SSD Neutron Series Utility is added
  • OCZ Barefoot 3 Utility is added:
    • NAND Flash Memory chip ID testing
    • Dump saving feature for NAND Flash Memory chips
    • Now it is possible to work with NAND Memory chips from DE task
    • New form "Utility Status"
    • New tests for switching a drive from the "Safe" mode into "Normal" mode
    • Error handling during data readout from a drive
    • Correct initialization of SSD after power reset
    • New test for unlocking and cleaning password information for the drives which are operated in "Normal" mode
    • Bug fixes for drives with 512GB capacity
Read more...
 

 
  • PC-3000 SSD. Indilinx Barefoot Active Utility overview

  • PC-3000 SSD. JMicron/Toshiba Active Utility overview

  • PC-3000 SSD. Intel Postville Active Utility overview

  • PC-3000 SSD. Samsung Active Utility overview

  • PC-3000 SSD. Seagate Active Utility overview

  • PC-3000 SSD. Marvell VanGogh Active Utility overview

  • PC-3000 SSD. Marvell VanGogh 2 Active Utility overview

------分隔线----------------------------